Multiloader v5.65: The Best Tool for Samsung Bada OS Devices
How to Flash Your Samsung S3850 with Multiloader v5.65
If you have a Samsung S3850 phone that is stuck on the logo screen or has software issues, you may want to flash it with a new firmware using Multiloader v5.65. Multiloader is a tool that allows you to flash Samsung Bada OS devices with different firmware versions. In this article, we will show you how to use Multiloader v5.65 to flash your Samsung S3850 and fix your phone problems.
samsung s3850 multiloader v5.65 206
What You Need
Before you start, make sure you have the following things ready:
A Samsung S3850 phone with a charged battery.
A USB cable to connect your phone to your computer.
A computer with Windows operating system and Samsung USB drivers installed.
Multiloader v5.65 software, which you can download from here.
A compatible firmware file for your Samsung S3850, which you can find from here.
How to Flash Your Samsung S3850 with Multiloader v5.65
Once you have everything ready, follow these steps to flash your Samsung S3850 with Multiloader v5.65:
Backup your phone data, such as contacts, messages, photos, etc., as flashing will erase everything on your phone.
Turn off your phone and remove the SIM card and memory card.
Press and hold the Volume Down + Camera + Power buttons simultaneously until you see a yellow triangle on the screen. This will put your phone in download mode.
Connect your phone to your computer using the USB cable.
Run Multiloader v5.65 on your computer as administrator.
Select BRCM2133 from the Port Search Type dropdown menu and click Port Search. You should see a COM port number in the Detected Device box.
Select Full Download from the Mode dropdown menu and check Boot Change.
Click Boot and browse to the folder where you extracted the firmware file. Select the file that ends with .bin.
Click Apps and browse to the same folder. Select the file that ends with .rc1.
Click Rsrc1 and browse to the same folder. Select the file that ends with .rc2.
Click Rsrc2 and browse to the same folder. Select the file that ends with .ffs.
Click Factory FS and browse to the same folder. Select the file that ends with .csc.
Click CSC and browse to the same folder. Select the file that ends with .csc again.
Click SHP APP and browse to the same folder. Select the file that ends with .app.
Click Download and wait for the flashing process to complete. Do not disconnect your phone or turn off your computer during this process.
When the flashing is done, you will see a green OK message on Multiloader and your phone will reboot automatically.
Congratulations!
You have successfully flashed your Samsung S3850 with Multiloader v5.65. You can now enjoy your new firmware and hopefully fix any issues you had with your phone. If you have any questions or problems, feel free to leave a comment below or visit our forum for more help.
What is Samsung S3850?
Samsung S3850 is a touchscreen phone that runs on Samsung Bada OS, a mobile operating system developed by Samsung. Samsung S3850 has a 3.2-inch display, a 2-megapixel camera, a microSD card slot, Wi-Fi, Bluetooth, and FM radio. Samsung S3850 was released in 2011 and was also known as Samsung Corby II or Samsung GT-S3850.
What is Multiloader v5.65?
Multiloader v5.65 is a software tool that allows you to flash Samsung Bada OS devices with different firmware versions. Multiloader v5.65 was developed by Xenon, a member of the XDA Developers forum. Multiloader v5.65 supports various Samsung Bada OS models, such as Samsung S3850, Samsung S8500, Samsung S8530, and more. Multiloader v5.65 can be downloaded from here.
Why Flash Your Samsung S3850 with Multiloader v5.65?
Flashing your Samsung S3850 with Multiloader v5.65 can help you fix various issues with your phone, such as bootloop, stuck on logo screen, software errors, virus infection, etc. Flashing your Samsung S3850 with Multiloader v5.65 can also help you upgrade your phone to a newer firmware version, which may improve your phone's performance, stability, and features. Flashing your Samsung S3850 with Multiloader v5.65 can also help you customize your phone by installing custom ROMs, mods, themes, etc.
How to Download and Install Multiloader v5.65
To download and install Multiloader v5.65 on your computer, you need to follow these steps:
Click here to download Multiloader v5.65 from Android File Host.
Extract the downloaded file using a program like WinRAR or 7-Zip.
Open the extracted folder and double-click on Multiloader.exe to run the program.
Click Yes if you see a User Account Control prompt.
You should see the Multiloader v5.65 interface on your screen.
How to Find a Compatible Firmware for Your Samsung S3850
To find a compatible firmware for your Samsung S3850, you need to do some research online. You can use sites like XDA Developers, SamMobile, or Firmware File to search for firmware files for your Samsung S3850. You can also use Google to search for keywords like "samsung s3850 firmware" or "samsung s3850 flash file". Make sure you download the firmware file that matches your phone's model number, region, and carrier. You can check your phone's model number by dialing *#06# on your phone or by looking at the sticker under the battery.
How to Backup Your Samsung S3850 Data
To backup your Samsung S3850 data, you can use various methods, such as:
Using Samsung Kies, a software tool that allows you to sync and backup your Samsung phone data to your computer. You can download Samsung Kies from here and follow the instructions on how to use it.
Using a microSD card, which you can insert into your Samsung S3850 and copy your data to it. You can use the File Manager app on your phone to select and move your data to the microSD card.
Using a cloud service, such as Google Drive, Dropbox, or OneDrive, which you can access from your Samsung S3850 and upload your data to it. You need to have an account and an internet connection to use these services.
ca3e7ad8fd