top of page

Excogitate Podcast Group

Public·131 members

Everything You Need to Know About QPST 2.7 Build 323 64 bit for Windows



step 6: now that you have been back to the home screen, we will need to download hardbrickfix from the below link. click on the download button. now you have to wait for the download to complete. once the download is complete, please open the zip file. now on the android side, you need to extract the cm11.0.1.0_8.1_apq_81_qpst_v2.7.47_2.img.zip. now you need to create a folder called recovery. then you need to extract the.img file to this folder. now you need to create a.txt file and place it in the same folder. then we need to create another folder called img. the reason for this is that we will be extracting this file later to flash the.img file to the phone. now you need to place your root folder in the same folder. in this root folder, you need to create a folder called apk. then you need to extract the zip file. now you need to extract the zip file to the folder inside apk. now you need to extract the.otf folder. now you need to place all the extracted folders in the folder img. now we need to create another folder inside img named cmd.




QPST 2.7 Build 323 64 bit



usage 1)download the zips 2)extract the qpst firmware zip file and run the qpst application 3)hover over the flash in the qpst tool, this will show an orange and green box. switch the box from orange to green. 4)click flash. 5)a window will appear and show that your device is being flashed. 6)once the device is flashed, the box will turn red and orange and then you will see the success message in the device window. you will be connected to the service center then. 7)once connected to the service center, you will be able to restore the device. 8)if the device isnt turned off before you flash it, you will be prompted to do so and it will be done automatically. if the device does not power off successfully or remain awake, please try to use the end button to turn it off and start the flashing process. or this problem can be fixed by reloading the device with the firmware files that is uploaded to our server first and power it off and then restart the flashing process. the device will be flashed successfully in a few seconds.


https://www.indigenouspeoplesclimatejusticeforum.com/group/we-are-indigenous/discussion/38feea4e-06d1-4dc1-9122-6683cba398fa

About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page